KM, CE Water Cartridge

The EVERSAFE range of portable cartridge operated type fire extinguishers is certified to BS EN3 and is manufactured under an ISO 9001 approved Quality System. Extinguishers are available in a wide range of sizes with ABC dry powder, Monnex powder, AFFF foam and water models. WATER: Water extinguisher is used for Class A fire involving carbonaceous materials such as wood, paper and textiles by cooling the fire and removing the heat needed for combustion. Water spray provides better wetting action that penetrates underlying burning materials and assist in reducing heat.

The EVERSAFE range of portable cartridge operated type fire extinguishers is certified to BS EN3 and is manufactured under an ISO 9001 approved Quality System. Extinguishers are available in a wide range of sizes with ABC dry powder, Monnex powder, AFFF foam and water models.

WATER: Water extinguisher is used for Class A fire involving carbonaceous materials such as wood, paper and textiles by cooling the fire and removing the heat needed for combustion. Water spray provides better wetting action that penetrates underlying burning materials and assist in reducing heat.

Features

  • Designed to maximum fire killing ability.
  • Simple operation and maintenance.
  • Pressurized with CO2 gas cartridges which are activated when levers are squeezed.
  • Effective extinguishes Class A fires.
  • Penetrates underlying burning material and assists in reducing heat.

Specification

MODEL EEW-6cs EEW-9cs
Type Cartridge Operated Type
Extinguishant Water
Capacity (Litres) 6 9
CO2 Gas Cartridge (g) 55 55
Valve / Headcap CE Marked Controllable Chromed Plated Brass Headcap with Safety Relief Valve
Body Diameter (mm) 158 178
Overall Height (mm) 585 630
Approx. Full Weight (kg) 11.1 14.6
Working Temp. Range 5°C to + 60°C
Working Pressure 12 bar
Test Pressure 25 Bar
Burst Pressure Exceed 69 bar
Approx. Discharge Range (m) 4 6
Approx. Discharge Time (sec) 38 49
Fire Rating 13A 21A
Fire Class A + Electrical Safety Test*
Coating (Internal) PPA (LJ 766)
Paint Finishing RAL 3000 Flame Red Polyester Powder Coating
Mounting Metal ‘T’ Wall Bracket
Manufactured & Certified to BS EN 3-7: 2004 + A1: 2007,BS EN 3-8: 2006 and BS EN 3-10:2009

* Safe if in Accidental contact with Live Electrical Equipment.

Complies with electrical Conductivity Test BS EN 3-7, Clause 9 Annex C.